What are the factors that affect the production efficiency of the sand making machine?

Project Background

What is the production efficiency of the sand making machine? The production efficiency of the sand making machine is simply the quantity of sand that can be produced per unit time.

What are the factors that affect the production efficiency of the sand making machine?

What is the production efficiency of the sand making machine? The production efficiency of the sand making machine is simply the quantity of sand that can be produced per unit time. The production efficiency of the sand making machine directly affects the output of the sand making line. The level of sand production will directly affect the interests of the sand making manufacturers. Increasing the production efficiency of the sand making machine is very important for sand making manufacturers.

production-efficiency-of-the-sand-making-machine-1.jpg

So how can we improve the production efficiency of the sand making machine? Let's talk about it specifically:

First of all, the humidity, hardness, fineness and viscosity of the material, the harder the material is broken, the more difficult it is, and the more serious the wear of the sand making equipment. The speed of breaking is slow, of course, the breaking ability is small. This requires us to be moderate in the choice of materials. When the humidity of the material, that is, the moisture contained in the material is large, the material is easily adhered in the sand making machine, and is also easily blocked during the feeding process, resulting in a reduction in crushing capacity. To solve this problem, firstly, the material temperature should be strictly controlled when the material is selected. If the temperature of the selected material is too large, the sunshine or air drying method can be used to reduce the percentage of moisture in the material. The fineness and fineness of the material after crushing are high, that is, the finer the material is required to be broken, the smaller the crushing ability. In this respect, depending on the specific requirements of the concentrator, if there is no special requirement, the fineness of the material is generally set to medium and fine. The viscosity of the material, that is, the greater the viscosity of the material, the easier it is to adhere. The material with high viscosity will adhere to the inner wall of the sand making chamber in the sand making machine. If it cannot be cleaned in time, it will seriously affect the working efficiency of the crusher and seriously affect the normal operation of the crusher. Therefore, when selecting materials, it must be noted that the viscosity of the material should not be too large.

Secondly, the composition of the material before the crushing of the material contains more fine powder, which affects the crushing, because these fine powders are easy to adhere to affect the transport. Therefore, materials with a high content of fine powder should be sieved once in advance. The fine powder should be filtered out of the material as much as possible to avoid affecting the normal operation of the crusher.

Other Case