Daily maintenance measures for lubricating parts of jaw crusher

Project Background

During operation, it is strictly forbidden to stand on the side of the machine, touch the body by hand, adjust, clean or overhaul

Daily maintenance measures for lubricating parts of jaw crusher

Jaw crusher operators must conduct safety technology education.

During operation, it is strictly forbidden to stand on the side of the machine, touch the body by hand, adjust, clean or overhaul;

The jaw crusher equipment should be grounded, the wires should be reliably insulated, and installed in the snakeskin bag. Always check the motor wiring for wear and leakage.

The jaw crusher lubrication component is a mechanism for easily and reliably injecting lubricating oil into the lubrication point (the machine has a total of 4 lubrication points, respectively, for four bearings.)

maintenance-measures-for-lubricating-parts-of-jaw-crusher-1.jpg

The lubrication method of the jaw crusher is as follows:

At the same time, in order to minimize the wear of the sliding bearing, liquid friction must be established between the journal and the interactive friction surface of the bearing. The necessary conditions are: proper fitting clearance, sufficient supply of lubricating oil, and the journal must have a sufficiently high diameter. The speed, oil hole and oil groove should be designed outside the bearing area of ​​the bearing.

Other Case