Is the principle and performance efficiency of the talc mill easy to use?

Is the principle and performance efficiency of the talc mill easy to use?

Talc mill principle

The talc mill is in the micro-grinding grinding chamber, and the grinding roller assembly is suspended on the grinding roller hanger through the cross-arm shaft. The grinding roller hanger is fixedly coupled with the main shaft and the blade holder, and the pressure spring is tightly pressed by the tension rod. The outer end of the cantilever of the roller bearing chamber is supported by the cross arm shaft, and the grinding roller is pressed tightly on the inner circular surface of the grinding ring by the spring pressure. When the motor rotates through the transmission device, the shovel is mounted on the blade holder. The knife rotates synchronously with the grinding roller, which is on the inner surface of the grinding ring.

When the talc mill is working, the main motor drives the main shaft and the turntable through the reducer, and the roller pin on the edge of the turntable drives dozens of grinding rolls to roll in the grinding ring raceway. The bulk material is broken into small particles by a hammer crusher and then sent to the storage bin by the hoist, and then passed through the vibrating feeder and the inclined feeding pipe to uniformly feed the material to the bulk disc of the upper part of the turntable. The material is scattered to the circumference of the circle under the action of centrifugal force, and falls into the raceway of the grinding ring, which is impacted, rolled and ground by the ring roller, processed into a powder through the processing of the three-layer loop, and the high-pressure fan passes the external air through suction. Inhaled into the machine and the pulverized material is brought into the classifier. The impeller rotating inside the classifier re-grinds the coarse material, and the fine powder that meets the requirements enters the cyclone dust collector with the airflow and is discharged from the lower discharge valve, and the airflow with a small amount of fine dust passes. The pulse dust collector is purified and passed through the fan and discharged.


Talc mill performance

  • 1. High efficiency and energy saving
  • When the fineness of the finished product and the motor power are the same, the talc mill is more than twice as high as the flow mill, the agitator mill and the ball mill.

  • 2. Consumable parts have long service life
  • The talc mill grinding roller and grinding ring are made of special materials, so that the utilization degree is greatly improved.

  • 3. High safety and reliability
  • The talc mill has no rolling bearing or screw in the grinding chamber, so there is no problem that the bearing and its seal are vulnerable, and there is no problem that the screw is loose and the machine is destroyed.

  • 4. High product fineness
  • The talc mill has a large feed size, and the disposable average particle size can reach 6.5um ultrafine powder.

  • 5. Environmental protection, cleaning
  • The talc mill uses a pulse dust collector to capture dust, and a muffler to reduce noise. It is environmentally friendly and clean.

The words “milling machine” seem to be the hallmark language of the mining industry. Modern market products are thriving, and most of them have more or less participation in ore milling. As a result, the demand for the ore powder market is increasing. As a soft ore that has been discovered so far, talc has naturally become the first to join the market. It is naturally impossible for talc to lack the hard work of the talc mill.

The talc powder processed by the talc mill can be widely used in ceramic products in daily life, including: manufacturing high-frequency porcelain, various industrial ceramics, radio porcelain, architectural ceramics, daily-use ceramics, ceramic glaze products. Wait. Because the talc itself has the advantages of no discoloration under the action of high temperature, enhanced whiteness after calcination, good gloss, uniform density and smooth surface. Therefore, it is a big skill in the field of ceramics.

Talc powder can also be applied to the medical world. The talcum powder has the characteristics of odorless, non-toxic, high whiteness, good compatibility, soft taste, strong gloss and strong smoothness during use. Therefore, there is no substitute for the value of medicinal. The talc mill can be switched between 325 mesh and 3000 mesh due to the fineness of its products, so it can meet the powder requirements of its participation in both the ceramic process and the value of the drug.